16
Menu operations
•
When there is no siganl available, the menu does not appear.
•
To make menu appear, press the Menu key on the Remote Control.
•
4 menus are available
o
Picture
Menu
o
Pro
Picture
Menu
o
Option
Menu
o
Installation
Menu
1- PICTURE menu
ITEM
SETTING
FUNCTION
CONTRAST
-50-+50
Used to adjust the contrast of the projected image.
BRIGHTNESS -50-+50
Used to adjust the brightness of the projected image
COLOR
-50-+50 Used to adjust the color level of the projected image
TINT
-50-+50
Use to adjust the color tint of the projected image
SHARPNESS 0 - 4
Use to adjust the sharpness of the projected image
WHITE ENHANCE 0 - 10
Use to adjust the white level of the projected image
2 - PRO PICTURE menu
ITEM
SETTING
FUNCTION
COLORTEMP HIGH BRIGHTNESR/6500K
Select when watching movies in dim lighting
as
in
a
theater.
SPECIAL
Select for the image of which black-
to-white
balance
is
critical.
USER1/USER2
Select to use the color temperature set by the
user
GAMMA
THEATER1
Select when watching movies in dim lighting
as
in
a
theater.
THEATER2
Select to make the skin color more vibrant even
in a dark scene
STANDARD
Select to secure the contrast even when the
room lighting is increased to some extent.
SET UP
OFF
Select to make Blacks lighter
3.75%/7.5%
Select to make the Blacks darker
Note :
Factory default is OFF, but 7.5% may be
better for US-made DVDs.
BLACK Stretch -2 / -1 / Off / +1 / +2
Used to slightly adjust the dark color shades
DISPLAY POS SHUTTER
Adjust blanking where the image is not present
VERTICAL LOC
Used to adjust the vertical position of image on
screen.
3 - OPTION menu
ITEM
SETTING
FUNCTION
SAVE MEMORY MEMORY 1/2/3
Used to store the settings of the menus in the memory.
TRANSP MENU
ON / OFF
Select to display the menus transparently.
MENU POSITION
5 points
Used to change the position of the menu on screen.
BACK COLOR BLUE / BLACK
Used to change the color of the screen at idle.
LAMP HOUR
LAMP HOUR
Used to display the lamp operating time.
LAMP RESET
Reset the lamp operating time when replacing the lamp.
LAMP MODE NORMAL
Select this option in normal use.