9
Adjust the picture quality by pressing the > and < buttons. The picture quality adjustment can be
made alter
natively in the PICTURE menu or the PRO PICTURE menu. (See below) Items in the menus are
shown in parentheses below.
CONT (CONTRAST)
Adjusts the contrast of projected images. Every time you press the > button, the projected image
becomes brighter and more vivid. Every time you press the < button, the projected image
becomes darker and less vivid.
BRIGHT (BRIGHTNESS)
Adjusts the brightness of projected images. Every time you press the > button, the projected
image becomes brighter. Every time you press the < button, the projected image becomes
darker.
C.TEMP (COLOR TEMP.)
Selects one of the preset color temperatures.
TINT (TINT)
Adjusts the tint of projected images. Every time you press the > button, the skin color of the
projected image becomes more greenish. Every time you press the < button, the skin color of
the projected image becomes reddish. (Available only when the NTSC signal is used as input.)
COLOR(COLOR)
Adjusts the color thickness of projected images. Every time you press the >button, the projected
image color becomes thicker. Every time you press the < button, the projected image color
becomes lighter.
SHARP(SHARPNESS)
Adjusts the sharpness of projected images. Every time you press the > button, the projected
image becomes sharper. Every time you press the < button, the projected image becomes
softer.
Operational range of the remote control
•
Keep the remote control photo-sensor out of direct sunlight or fluorescent lamp light.
•
Keep the remote control photo-sensor at least 2 m away from fluorescent lamps.
Otherwise, the remote control may malfunction.
•
If there is an inverter-operated fluorescent lamp near the remote control, the remote
control operation may become unstable. On this occasion, stick the attached protection
sticker on one of the photo-sensors that is closer to the fluorescent lamp.
•
Operate the remote control within a distance of 10 m from the projector, pointing the
light beam at the remote control photo-sensor (front or rear) of the projector.
•
When operating the remote control, keep the distance from the remote controller to the
projector reflected from the screen within about 6m. The operable range of the remote
control, however, depends on the characteristics of the screen.
•
Remote acts with a maximum vertical angle of 15 degrees from the projector plan.
