29
Air Sensor
94ºF
Solar Sensor
Short circuit
Water Sensor
Open circuit
+
+
+
>
>
>
>
>
>
No function
No function
No function
Move to previous/next menu item
Move to previous/next menu item
Move to previous/next menu item
If the sensor appears to operating properly, then the temperature will be displayed. If this
temperature is not correct then check the placement of the sensor. If the problem is not
placement related, then the sensor will, most likely, require replacement. If the display is
“Open Circuit” or “Short Circuit” then check the wiring to the sensor and also make sure that
the wires are secure in the terminal block in the Aqua Logic main unit. Note that the solar
sensor is displayed only when the solar function is enabled (configuration menu).
Main: r1.05
Display: r1.27
+
>
>
No function
Move to previous/next menu item
If you call the Goldline Technical Service Dept. for assistance, they may ask for the software
revisions of both the main unit and each of the display/keypads that are attached to the
system. Note that it is possible that different display/keypads have different software
revision levels. For this reason, it is advisable to check this diagnostic menu item on every
display.
