6
Programming Menu Flowchart
The Aqua Logic’s five menus have many items in each menu that allow you to customize the operation of
your pool/spa equipment. The chart below shows the Aqua Logic’s five menus as well as each menu’s
specific settings.
The Default Menu is a series of informative displays (temperatures, salt levels, chlorinator settings, etc.)
with nothing to set. The Aqua Logic will automatically switch to the default menu when no keys have been
pressed for 2 minutes and will then scroll through each display.
denotes conditional items
default menu
day and time
air/water temperature
chlorinator setting
salt level
settings menu
spa heater1 temp (off, 65ºF-104ºF)
pool heater1 temp (off, 65ºF-104ºF)
spa solar temp (off, 65ºF-104ºF)
pool solar temp (off, 65ºF-104ºF)
superchlorinate (on/off)
spa chlorinator setting (0-100%)
pool chlorinator setting (0-100%)
day and time
display light (always on/60 sec)
teach wireless remote
wireless channel
timers menu
filter pump -- all days
(or)
filter pump -- weekends
filter pump --weekdays
low speed -- all days
(or)
low speed -- weekends
low speed --weekdays
spa -- all days
(or)
spa -- weekends
spa --weekdays
lights -- all days
(or)
lights -- weekends
(or)
lights -- countdown
lights -- weekdays
aux1 -- all days
(or)
aux1 -- weekends
(or)
aux1 -- countdown
aux1 -- weekdays
aux2 -- all days
(or)
aux2 -- weekends
(or)
aux2 -- countdown
aux2 -- weekdays
valve3 -- all days
(or)
valve3 -- weekends
valve3 -- weekdays
super chlorinate hours (1-96)
diagnostic menu
chlorinator diagnostics
instant salt
flow switch
water sensor
air sensor
solar sensor
software revision
configuration menu
filter config.
heater1 config
heater extend (enabled/disabled)
solar config.
pool/spa config.
lights config
aux1 config
aux2 config
valve3 config
1 speed, 2 speed
freeze protection (enabled/disabled)
heater1 (enabled/disabled)
heater cooldown (enabled/disabled)
solar (enabled/disabled)
solar extend (enabled/disabled)
solar priority (enabled/disabled)
spillover (enabled/disabled)
filter operation (pool only/spa spillover)
function (manual only, timeclock, countdown timer)
function (manual only, timeclock, countdown timer, solar, low speed filter pump)
pool only / spa only / pool & spa
interlock (enabled/disabled)
freeze protection (enabled/disabled)
function (manual only, timeclock, countdown timer, solar, low speed filter pump)
interlock (enabled/disabled)
freeze protection (enabled/disabled)
function (timeclock, solar, in-floor cleaner)
all timeclocks (7 or 2/5 day)
time format (12 or 24 hr)
units (english/metric)
reset config to default
interlock (enabled/disabled)
freeze protection (enabled/disabled)
