4
3.5 CONTROL MODULE
POWER ON LIGHT:
Illuminates when battery voltage is applied to control module.
RED X-RAY PULSING LIGHT:
Blinks after time delay button or remote cable button is pressed to warn that the
XRS3 is going to pulse. The light stays on continuously while the XRS3 is pulsing. This is a failsafe warning light. If
the light does not work the X-ray unit will not pulse. See settings menu for fail safe override in emergency situations.
LIQUID CRYSTAL DISPLAY (LCD):
80 digit LCD. Home displays number of pulses selected and delay time before
the rst pulse. Home will also indicate if multiple pulse trains have been entered. Arrows allow operator to scroll
through various menu options.
DIRECTIONAL BUTTONS:
Used to maneuver through the menu.
DELAY SWITCH:
Left and Right arrow buttons pressed simultaneously Initiates the delay mode.
EMERGENCY STOP/ENTER SWITCH:
Stops the unit before it begins pulsing or stops the unit in the middle of a pulse
train. Also used as the enter button to select desired option.
X-RAY PULSING
LIGHTS
ENTER /
EMERGENCY
STOP
KEY
POWER ON
LIGHT
LCD
MODEL
IDENTIFICATION
DIRECTIONAL BUTTONS
Figure 3: Control Module
DELAY SWITCH
