3
3.0 PHYSICAL DESCRIPTION
Figure 1: XRS3 X-ray Unit
HIGH VOLTAGE PULSER/TUBEHEAD.
The main body of the XRS3 is the tube head
which contains the tube cavity, cold cathode type X-ray tube, spark gap, high voltage
capacitor, and transformer. The standard collimator located on the front of the head
limits the X-ray beam to 40 degrees. Special order collimators up to 85 degrees are
available.
BASE
. The base of the XRS3 contains an identi cation label and a ¼-20 brass insert
compatible with standard camera tripods. The base also accommodates a quick
release external tripod mount. The identi cation label located on the bottom of the
generator lists the manufacturer’s name and address, model number, serial number,
weight, volt, amp, and production date.
BATTERY PACK
. The standard battery pack
is a DeWalt® 20V 2 amp hour Li Ion battery
(DCB203).
BATTERY CHARGER:
The standard battery
charger is the DeWalt® DCB107 110V charger
or DCB105 220V charger. (Note DeWalt part
numbers may change). Battery charge time is
less than one hour. See battery charger manual
for additional instructions and warnings.
PICATINNY RAIL:
The XRS3 has a 21 mm picatinny rail located on each side of
the housing.
BATTERY
BEAM ANGLE
LABEL
COLLIMATOR
KEY
Figure 2: Base
TRIPOD MOUNT
TRIPOD MOUNT
RELEASE TAB
RADIATION WARNING LABEL
CONTROL MODULE
HANDLE
BASE
HEAD
PICATINNY RAIL
