INSTALLATION INSTRUCTIONS
In planning the installation for the
it is necessary to determine where the
unit is to be installed, the routing of the B-type vent system, and whether optional
accessories are to be used gas supply piping should also be planned.
The
can be mounted on any of the following surfaces:
1. A
combustible surface.
2. A raised wooden platform.
3. Four (4) corner supports.
(Example: four (4) concrete masonry blocks.) These supports must be positioned so
they contact all four corner edges on the bottom of the unit.
If the
is installed directly on carpeting, tile, or other combustible material
other than wood
the appliance shall be installed on a metal or wood panel
extending the full width and depth of the unit.
Fireplace framing can be built before or after the
is set in place. Framing
should be positioned to accommodate wall covering and
facing material.
The
framing should be constructed of 2 x 4 lumber or heavier. The framing
headers may rest on the
standoffs. Refer to Figure
7
.1 for
and
framing reference dimensions.
CAUTION: VERIFY FIREPLACE DIMENSIONS, FRAMING METHODS AND WALL
COVERING DETAILS BEFORE FRAMING CONSTRUCTION BEGINS.
Determine the exact position of the
so that the vent run can be planned.
Figure 2.1 shows possible locations for the
inside of a room,
mount
in a chase
.
Using a level, make sure the
fireplace is properly
positioned and
squared.
WARNING: DUE TO HIGH TEMPERATURES, THE APPLIANCE SHOULD BE
LOCATED OUT OF TRAFFIC AND AWAY FROM FURNITURE AND DRAPERIES.
CLOTHING OR OTHER FLAMMABLE MATERIAL SHOULD NOT BE PLACED ON
OR NEAR THE APPLIANCE.
6
Model LFP9618 (with the use of the Outside Air Kit) can be installed in a bedroom
(in the United States) which has a total volume of unconfined space appropriate to
the particular installation. Refer to the National Fuel Gas Code ANSI Z223.1/NFPA
54 - (current edition), the Uniform Mechanical Code - (current edition), and Local
Building Officials for the options allowed in obtaining an effective bedroom volume
of unconfined space.
Summary of Contents for LFP9618
Page 17: ...17 ...
Page 19: ...19 Inc ...