background image

Safety Guide 

Always  choose  a  safe  location  for  the  BBQ,  keeping  in  mind  the  safety 
precautions  outlined.  Ensure  all  packaging  has  been  removed  from  the 
unit before use.  

NOTE 

This  BBQ  shall  only  be  used  in  an  above 
ground  open  air  situation  with  natural 
ventilation,  without  stagnant  areas,  where 
gas leakage and products of combustion are 
rapidly  dispersed  by  wind  and  natural 
convection.  
Any  enclosure  in  which  the  BBQ  is  used 
shall comply with one of the following:   
An  enclosure  with  walls  on  all  sides,  but  at 
least one permanent opening at ground level 
and no overhead cover. (Refer to Figure 1).  
Within  a  partial  enclosure  that  includes  an 
overhead cover and no more than two walls. 
(Refer to Figure 2 and Figure 3).  
Within  a  partial  enclosure  that  includes  an 
overhead cover and more than two walls, the 
following shall apply:   

At  least  25%  of  the  total  wall  area  is 
completely open, (refer to Figure 4), and  

At least 30% of the remaining wall area is 
open and unrestricted, (refer to Figure 5)  

In the case of balconies, at least 20% of the 
total wall area shall be and remain open and 
unrestricted. 

Figure  1 

-  Enclosure  with  walls  on  all  sides  but 

no overhead cover  

Figure 2 

- Partial Enclosure with overhead cover 

and no more than two walls 

Figure 3 

- Partial Enclosure with overhead cover 

and no more than two walls 

Figure  4 

-  Open  side  at  least  25%  of  total  wall 

area.  
30% or more in total of the remaining wall area is 
open and unrestricted. 

Figure  5 

-  Open  side  at  least  25%  of  total  wall 

area.  30%  or more  in total  of the  remaining  wall 
area is open and unrestricted. 

Page 4 

Summary of Contents for Kiwi Choice GBQKC140





























Reviews: