Goldair Kiwi Choice GBQKC140, Operating Instructions Manual

Page: 17 / 28

Assembly Procedure
Step 13.
The BBQ is intended to be used with a standard 9kg LPG cylinder. This is the type of cylinder that
can be refilled at petrol station or swapped for similar cylinder.
Place the cylinder in position under the Left hand side table, so that the gas bottle is on the outside
of the BBQ.
Take the hose that came with the BBQ, check that it has a rubber seal on the regulator end of the
hose and connect this end to the gas cylinder, ensuring that the hose is not twisted. You
won’t need
a spanner here. Just turn the fitting in an anti clockwise direction and hand tighten as much as you
can. This should seal it sufficiently.
It is important to conduct a leak test prior to use. Follow leak test procedure. (Procedure
located on Page 2 of this manual)
Page 16
Step 12.
Connect the Regulator Hose to the BBQ. Screw the threaded nut onto the fitting of the BBQ and
tighten with a spanner.