SUPPORT AND TECHNICAL ADVICE
Goldair
–
New Zealand
Monday
–
Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
[email protected]
Goldair
–
Australia
Monday
–
Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
Operating Your Heater
TECHNICAL SPECIFICATION
Model No:
GSCV120
Supply:
220-240VAC 50Hz
Wattage:
1800-2000W
SAFETY DEVICES
This appliance has two protection devices:
•
Resettable Thermal Link - this will automatically disconnect the power to the
appliance at a pre-set overh eat temp erature. After cooling down it will reset and
power on again. If this occurs, investigate what is causing the appliance to
overheat.
•
Thermal Fuse - this disconnects the appliance permanently in case of overheating.
(It is non resettable).
CAUTION:
The heater generates heat during use. Precautions must be
taken to prevent the risk of burns, scalds, fires or other damage to persons.
CARE AND CLEANING
•
The heater requires regular cleaning to ensure trouble free operation:
•
Unplug the heater from the mains supply before cleaning.
•
Ensure that the heater has been allowed to cool down completely before cleaning.
•
The common cause of overheating is deposits of dust or fluff in the appliance.
Ensure th ese d eposits are removed regularly by unplugging the appliance and
vacuum cleaning the air vents and grills.
•
Use a damp cloth (not wet) to wipe the exterior of the heater to remov e dust and
dirt.
•
Never use solutions such as petrol, thinners or polishing agents.
•
Ensure the heater is dry before plugging back into the mains supply.
•
Do not attempt to dismantle the appliance.
•
There are no user serviceable parts. For service or repair, contact an authorised
electrical service technician
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase.