•
The appliance must not be immersed in any liquids.
•
There are no user serviceable parts installed in the unit.
•
Do not place the unit in wardrobes or other enclosed spaces as this may cause
fire hazards.
•
This unit is not supposed to be used in or around locations where foodstuffs,
works of art or delicate articles of science, etc. are stored.
•
If your appliance does not work, or is not working properly, contact the place of
purchase or the Customer Services Team.
General Care and Safety Guide
Assembly
Screw holes in base of heater
Screws in position once fitted to heater
Remove the packaging. Check to ensure tha t all pa rts of this hea ter, cord and plug a re not damaged.
Confi rm all pa rts before disposing of ca rton. Do not lea ve packaging ma terials like bags and staples
wi thin reach of children or animals.
1 x Convector Heater
2 x Feet
4 x Screws (taped to one of the feet)
ASSEMBLY
Ea ch foot supplied wi th this heater (supplied separa tel y in the ca rton) requi res onl y 2 s crews to a ttach
them s ecurely to the heater. Holes are pre -drilled in the base of the heater.
The s crew pa ck to a tta ch the feet to your hea ter will be taped to either one of the fee t for your heater, or
ta ped to the plug head.
TIP: Slightl y a ngle the s crews into the holes when you i nsert them. As you tighten them, they will
s tra ighten and secure the feet.
The foot comes with 4 pre -drilled holes. It does not matter which way round you mount them.
The pi ctures above show the l ocation of pre-drilled holes on the heater base.
WARNING:
Heater must not be used without the feet fitted.
This appliance has been supplied with
‘
1 way
screws’
for permanent installation of the
feet. This is a safety requirement for the New Zealand and Australian market.