USING THE HAND VAC
Remove the Hand Vac from the Stick Vac by pressing the release button and gently
pulling the unit away from the Stick Vac by the handle.
EMPTYING THE STICK VAC
For best performance, empty the Stick Vac and clean the dust cup filter after each use.
1.
Press down simultaneously on both dust cap release buttons and pull off the dust
cap container.
2.
Pull out the dust cup filter.
3.
Empty the contents from the dust cup container.
4.
Rinse the filter in cold water. Do not machine wash. Wait until completely dry. Air
dry only.
5.
Replace the filter carefully into the dust cup compartment. NEVER operate the
appliance without the dust cup filter in place.
6.
Reattach the dust cup container into the appliance.
USING THE MOTORISED BRUSH HEAD
NOTE:
The motorised brush head is for vacuuming short pile carpets or rugs and
is for use on the Stick Vac unit only.
CAUTION:
DO NOT touch the motorised head while it is in motion.
1.
Ensure the appliance
“On/Off” button is in the “O” position.
2.
Firmly insert the motorised brush head into the air intake nozzle of the appliance,
ensuring that the contact pins are engaged in the connector slots in the unit.
3.
To remove the motorised head, press the release button at the rear of the nozzle
and pull the attachment downwards.
