WIRING DIAGRAM
HEAT/LIGHT/VENT INSTRUCTIONS
ELECTRICAL INSTALLATION
IMPORTANT NOTE: All electrical work and installation of this product must be performed
by a registered electrician in accordance with AS/NZS 3000:2007.
Note: The unit is fitted with a safety thermal switch which will activate the
fan to cool the unit if the heat generated by the heat lamps exceeds a
certain level.
It is imperative that this feature is enabled.
Ensure power to the circuit to be used has been isolated at the power board before
carrying out any electrical work.
Technical Specifications:
220-240VAC 50/60Hz
1131W (Max)
