![background image](http://html1.mh-extra.com/html/goldair/ghl425w/ghl425w_operating-instructions-manual_2240350004.webp)
HEAT/LIGHT/VENT INSTRUCTIONS
USER INSTRUCTIONS
Your Heat/Light/Fan unit comes with a wall switch included. Once wired correctly by your electrician
you need to simply follow the below instructions.
•
To turn the centre light bulb on press the
“LIGHT”
switch down (and up to turn off).
•
To turn the ventilation fan on press the
“FAN”
switch down (and up to turn off).
•
To turn 2 heat lamps on press one of the
“HEAT”
switches down (and up to turn off).
•
To turn all 4 heat lamps on press both of the
“HEAT”
switches down (and up to turn off).
Air Flow Requirements:
For maximum efficiency to remove steam and odours, there must be an adequate air flow within the
room. To obtain maximum air flow ensure there is a gap under doors or open windows slightly. A good
test for this is that the fan should not change speed (or sound) when you close or open the bathroom
door.
Important Note:
Always turn the fan on when using the heat lamps to minimise any undue heat build up
in the unit.