background image

Thank you for choosing GOLDAIR. Your GOLDAIR Bathroom Heat/Light/Vent has been designed and
manufactured to high standards of engineering. With proper use and care, as described in this leaflet,
you can expect years of service. Please read these instructions carefully.

GENERAL CARE AND SAFETY GUIDE

Please read all instructions carefully before using your Heat/Light/Vent.

Keep instructions for future reference.

Use only the voltage specified on the rating plate of the appliance.

Do not cover or restrict airflow as the appliance may overheat and become a fire risk.

Do not cover heat lamps, or inlet of airflow by placing these areas of the appliance against any
surface.

Do not mount appliance close to any heat source.

Do not operate in areas where petrol, paint or other flammable liquids are used or stored.

Do not use the appliance to dry clothes.

Do not insert or allow foreign objects to enter any point of the appliance, as this may cause an
electric shock, fire or damage to the appliance.

Do not immerse in liquid or allow liquid to run into the interior of the appliance, as this could create
an electrical shock hazard.

Do not operate after the appliance malfunctions, has been dropped/damaged in any manner.

Do not operate the appliance with wet hands.

Use this appliance only as described in this manual. Any other use is not recommended by the
manufacturer may cause fire, electric shock or injury.

Do not use this appliance in a window as rain may cause electric shock.

Do not connect the appliance to the electrical supply until completely assembled.

This appliance is intended for household use only and not for commercial or industrial use.

This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience or knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety.

Young children should be supervised to ensure they do not play with the appliance.

HEAT/LIGHT/VENT INSTRUCTIONS

Summary of Contents for GHL425W









Reviews: