![background image](http://html1.mh-extra.com/html/goldair/gcw220/gcw220_operating-instructions-manual_2240188008.webp)
Installing your Appliance
Always choose a safe location for the heater, keeping in mind the safety
precautions outlined. Ensure all packaging has been removed from the unit
before use.
BEFORE USING THIS APPLIANCE, IT MUST BE WALL MOUNTED.
WALL MOUNTED HEATERS ARE ONLY TO BE MOUNTED ON HEAT RESISTANT
WALLS THAT COMPLY WITH CURRENT AS/NZS SPECIFICATIONS & BUILDING
REGULATIONS
CAUTION:
Do not run the power cord behind the heater.
CAUTION:
Do not mount directly under or over an electrical power socket.
It is recommended to install the heater to the side of the power socket.
The cord length is 1.5m, an electrician may be required to install a power
socket nearer to the appliance.
LOCATION
The heater must be located with at least 1 metre clearance to anything in
front of the heater.
NOTE:
Your Goldair Ceramic Wall Heater must be installed with
•
at least 1.8m clearance from the floor
•
at least 300mm clearance from the ceiling
•
200mm clearance from the sides
•
300mm from the bottom of the heater including to other appliances,
shelves and pictures.
•
At least min 1000mm clearance from air outlet from any flammable
material including textiles, curtains and soft furnishings.
Do not mount anything within 300mm below the heater as this may cause
the air flow to be restricted.
Do not mount the heater above a door.
See mounting instruction on next page