HEATER CONTROL PANEL
•
Press the Power Button
to turn the unit on.
•
The unit will start to blow out air at room temperature.
•
Press the Power Button a second time; the heater will operate in Low Heat Mode.
•
Press the Power Button a third time; the heater will operate in High Heat Mode.
•
Press the Power Button again; the heater will turn off.
NOTE:
•
To assist in protecting the internal components, when the unit is turned Off the fan will
continue to blow room temperature air for a period of 30-60 seconds before shutting
down to standby.
DO NOT TURN OFF AT THE WALL DURING THIS TIME.
•
The Standby (Hold) LED will remain on unless power is turned off at the wall.
•
For the Low and High Heat settings the fan remains at the same speed; only the
element changes temperature to create the greater/lesser heat output.
TIMER
•
The Timer function allows the heater to operate continuously from 0.5 - 7.5 hours
before automatically turning Off. The Timer can be operated in any mode.
•
Press the TIMER Button on the control panel (or remote) once and the heater will
display 0.5 hours.
•
By pressing the TIMER Button repeatedly you can adjust the desired length of time in
0.5 hour increments.
•
The Timer indicator will illuminate on the control panel displaying your selected time.
•
For example: If the Timer is programmed to operate for 5 hours, the 4 hour and 1 hour
light will be illuminated (as shown below).
•
To stop the Timer function, press TIMER button repeatedly until all time indicators are
OFF
Operating Your Heater
