![background image](http://html1.mh-extra.com/html/goldair/gcw220/gcw220_operating-instructions-manual_2240188012.webp)
Operating Your Heater
REMOTE
The remote control buttons are as follows:
The remote control supplied with
this appliance uses a
CR2025
coin
type battery.
DANGER IF SWALLOWED OR
PLACED INSIDE ANY PART
OF THE BODY
Press once to turn the heater on to fan only.
Press again to put the heater back in standby.
The MODE button switches the heater between
low and high heating.
Press the + or
–
buttons to set the desire temperature
for your room.
The setting range is 10-49
℃
. When you are setting the
temperature, the display will show the setting
temperature. After you have selected the desired
temperature, the display will show the current
temperature of your room .
Press the TIMER Button once and the heater will display 0.5 hours. By pressing the TIMER
Button repeatedly you can adjust the desired length of time in 0.5 hour increments.
The Timer indicator will illuminate on the control panel displaying your selected time.
For example: If the Timer is programmed to operate for 5 hours, the 4 hour and 1 hour
light will be illuminated.
To stop the Timer function, press TIMER button repeatedly until all time indicators are
OFF.
For best results, aim the remote directly at the remote sensor on the front panel of the
heater. The remote has the following range of operation.
•
Directly in Front
–
9m
•
45
o
Angle
–
5m
•
30
o
Angle
–
4m