Goldair GCEV340, Operating Instructions Manual

Page: 8 / 12

Place the unit on a dry, level and sturdy surface.
Ensure the speed control is at OFF position before plugging the power cord into the socket.
The ON/OFF LED for the power will light to indicate that there is power to the appliance.
On/Off
Turn the appliance ON by pressing the ON/OFF button. The appliance will start in the default
mode of normal/low speed setting.
Speed
Press speed to change fan speed from 'high-mid-low', the relevant speed indicator LED will light
up.
Timer
If you wish to turn the appliance off at a pre-determined time press the timer button. The
appliance can be set to turn off at any time between 0.5 hours and 7.5 hours.
To set the timer, turn the appliance on at the desired speed, press the timer button until the
desired run time is illuminated. The fan will turn off once the time has expired. If no time is
selected, the appliance will operate continuously.
Cool Mode
To initiate the cooling function press the ‘cooler’ button. This function blows normal air through
a water curtain to cool the air. Press the button again to switch this function off and the
appliance will operate in fan only mode.
Note: You must have water in the water tank for this function to work.
Note: It will take a few minutes for the cooler air to come out of the appliance.
Swing
Pressing the swing button will make the air guide rotate to better distribute air.
To stop the rotation, press the swing button again.
Remote control
The remote requires a line-of-sight path to allow for the signal to be received by
the unit. Position the unit so the receiver lens is visible from the remote control.
The symbols on the Remote correspond to the symbols on the main unit.
Remote control battery The remote control comes with a CR2025 lithium coin
cell battery. To install, remove the battery cover on the bottom of the remote
control. Remove any plastic protection from the battery and place it in the
Remote with the + side facing out. Then reposition the cover onto the bottom
of the remote.
If your remote no longer works, please try replacing with a new CR2025 battery.
CAUTION do not leave the appliance operating unattended.
IMPORTANT! NEVER COVER THIS APPLIANCE!
Operating your Fan