EN61-DS PS 16 bar
Artikel-Nr. 01 150 50 f
15 / 50
CONNECTIONS
Inlet, optional
Trading name and dimensions
acc. to standard
Installation notes
Combinded fitting (Komb.A)
•
with polyamide gasket
•
G.5
= Thread W 21.8 x 1/14
Spanner size 30
Hexagonal
FR Shell (Shell-F)
•
Wing nut, soft with rubber gasket and 5-wing
cap nut
•
G.2
= Thread 21.8 x 1/14-LH - 60° ÜM
Tighten hand-tight.
Small cylinder KLF
•
with 5-wing cap nut
•
G.12
= Thread W 21.8 x 1/14 ÜM
Tighten hand-tight.
Italian connection
•
with rubber gasket and cap nut
•
G.1
= Thread W 20 x 1/14 ÜM
Spanner size 25
Hexagonal
Shell Combi Soft (Komb.Shell-WS)
•
X.2
•
with gasket and coupling nut
•
Thread W 21.8 x 1/14 lh
Spanner size
SW 25
Hexagonal
Soft POL wings connection (POL-WF)
•
with rubber gasket and retaining screw
•
G.10
= Thread 0.880-14 NGO lh
Spanner size 24
Hexagonal
Gaskets in the connections must not be damaged and be placed correctly in the frame.
All
G. and H.
connections
according to EN 16129. Other connections may also be used.
Outlet, optional
Trading name and dimensions
acc. to standard
Installation notes
Ball-cone connector
•
H.4
= Thread G 1/4-LH-KN
Torques:
G 1/4 = 5-7Nm
Compression fitting RVS
•
H.9
= RVS 10
Screw-in fitting
•
H.22 = IG
G 1/4
•
For accepting a screw-in fitting with O-ring
