GOgroove GGAARK1100BKEW, User Manual

Page: 6 / 12

6
Operating instructions
EN
To avoid unwanted pressure on the turntable, it is
recommended to clean the record while removed from
the record player.
Remove the cover from the velvet brush. Holding the
record with the anti-static microfiber cloth, lightly press
the velvet brush onto the record. Following the grooves,
run the velvet brush around the record in a counter
clockwise direction until the dust is removed.
Use the long bristled velvet cleaning whisk to remove the
dust from the velvet brush before replacing cap.
Remove cover and clear wrap from silicone cleaning roller.
While applying minimal pressure, roll the silicone roller
over the record in the direction of the grooves until the
record is clean.
To clean the roller, place silicone roller under warm
running water. Let air dry before replacing cover.
To avoid damaging the stylus, clean in the back-to-front
direction only. Do not clean side-to-side or front-to-back.
Place the stylus cleaning brush onto the stylus. Gently pull
the brush towards the front of the stylus. Complete these
steps two or three times to clean.