EN - 11
EN
LED INDICATOR
Bluetooth Mode: When in Bluetooth mode, the blue and red LED indicators will flash alternately.
When connected ,the LED will stop flashing.
Charging Mode: When charging, the LED light will remain red. When finished charging ,the LED
light will return blue.
BLUETOOTH PAIRING MODE
Turn on the headphone by holding down the power button. Keep pressing until the LED lights
flash red and blue. Release the power button after LED’s start flashing red and blue.
CONNECTING TO A BLUETOOTH DEVICE
1. When the headphones are in pairing mode, open the wireless setting on your device. Make
sure the device’s Bluetooth setting is turned on.
2. Search for GOGEN HBTM91B
3. Choose GOGEN HBTM91B pair, your device should them show “connected”.
4. The LED lights on the headphone will turn off once connected to your devices.
5. If your device asks you for a password to connect to the headphones, key in “0000”. This
is normally not needed.
MULTI-POINT CONNECTIONS
These headphones are capable of connecting to two devices at the same time.
TO CONNECT
1. Disconnect your first phone from headphones from your Bluetooth settings and then restart
the headphones pairing mode. Turn on the Bluetooth function on the second phone and look
for GOGEN HBTM91B. Pair your second device. Then turn on the Bluetooth function on your
first phone and re-connect to GOGEN HBTM91B.Both devices should now be connected.
2. If you are on a call on one device and a call comes in on the second device you can:
a. Reject the incoming call on the second device by pressing the MF button for 1 second
b. Put the current call on hold and answer the call on the second device by pressing the MF
button twice
c. Hang up the call on the first device and answer the call on the second device with a short
press of the MF button
d. Go back to the original call after answering the second call by pressing the MF button twice
e. Hang up on the second call and go back to the original call with a short press of the MF button
CHARGING
Connect the provided Micro-USB cable to a computer or a USB charger .The LED lights will turn
red while charging .The LED lights will turn blue when charging is finished.
LOW BATTERY
When the battery power is low, the headphones will automatically turn off. To maintain proper
battery levels, charge the headphones at least once per month. If the headphones sit without being
power on for long periods of time, they will need to be charged to maintain full battery levels.
WIRED MODE
You may use the included 3,5mm audio cable to directly plug the headphones into an audio device.
When using the 3,5mm cable, all wireless functions, along with button functions will not work.
To adjust volume levels or track selections, you must use the connected devices ’s functions.
TO CONNECT
1. Insert the 3,5mm cable into the 3.5mm port on the headphones.
2. Insert the other end of the 3.5mm audio cable
3. Control functions of the headphones, volume, track, play/pause through the connected audio
device.
