ENG
ENG - 25
Antenna
- For FM reception, adjust the telescopic antenna appropriately to obtain the best reception on
the band selected.
- The AM signals are picked up through the built-in (internal) ferrite antenna. The set should be
placed to a position for the best reception.
Insertion & removal of discs
- When opening the CD-door, always ensure the disc is not in motion (Not spinning) when you
open the CD-door. Always press “stop” button to stop the disc spinning first.
- Place a CD into the compartment with the label-side (printed side of disc) facing upwards.
Press down in the center part of disc until the disc “locks” onto the center spindle.
- When the CD has been placed onto the center spindle, gently lower the CD-door downwards
until it locks shut.
- The CD is now ready to be played.
- To remove a disc, follow the same procedure as described above, except to remove the CD
instead of inserting it into the compartment, by placing one finger at the middle of disc (center
spindle) & the other at the edge of the disc & gently pulling upwards.
- Important :
always hold a CD by its edges. Avoid getting any finger prints, smudges or dirt
onto the surface of a disc. In case this happens, use a special CD-cleaning cloth or cleaning
kit to remove the dirt or smudges.
Normal CD operation
- Insert a CD as described.
- Slide the function switch to “CD (CD-MP3/ USB-MP3/ SD-MP3)”.
- The CD will spin and then the display will momentarily show the total number of t racks
(songs) of t he disc.
- The first song (track) will automatically start playing. The display will indicate the current track
no. (“01” If it is the first track) & play back running time (mins : secs).
- At anytime during playback, press the play/ pause button
. To pause operation of the
unit. Press play/ pause button to resume operation at the same track & position.
- At anytime during playback, press the “stop” button
. To stop operation of the set. This
will reset the CD player to the first track (if you press play after stop, the first track will always
start playing).
- At anytime during playback, “press and release” the back/next buttons :
or
. To skip
backwards or forwards by one track, as desired.
- At anytime during playback, “press and hold” the back/next buttons :
or
to fast-rever
-
se (review) or fast-forward (cue) the specific track, which is currently playing.
- At anytime during playback, press the “play mode” button to select one of the special play
-
back functions as described in the “play modes” section.
Summary of Contents for CDM699
Page 32: ......
