GoFind, Inc. GoFindR, User Manual

Page: 12 / 65

6
GoFindR Power On and LED Indicators
A. POWER ON
To power on the GoFindR, press the power button. If satellite data needs to be updated, the
LED will flash from Amber to Green while uploading data to the tracker. The LED will then
flash between Amber and Red while writing this data to the GPS. After the data is written, the
LED will go out. The LED will be off during normal operation.
Pressing and holding the Power Button for 3 seconds will begin shutdown of the tracker. The
LED will glow Red and an SMS will be issued indicating the tracker is powering down.
Pressing and holding down the power button for 10 seconds will perform a hard reset of the
GoFindR.
B. LED INDICATORS
a. Battery Indicator
Will light when the GoFindR is on the Charging Cradle
The Amber Indicator shows that the GoFindR is charging
The Green indicator shows that the GoFindR has completed charging
The battery indicator is not lit when the GoFindR is off the charger and in normal use.
b. GPS Indicator
The Power button acts as the GPS indicator.
The GPS indicator is not lit when the GPS is operating normally.
c. Cellular Indicator
i. Turns Green, when the cellular module is powering on or rebooting.
ii. Glows Amber at the start of the GPS Data download.
iii. The Cellular indicator is not lit when the Cellular module is operating normally.