Goff 2460, Operation And Maintenance Manual

Page: 98 / 105

L
RESTARTING THE BLAST CLEANING SYSTEM AFTER LOCK-OUT/TAG-OUT
After lock-out/tag-out, you must restart the blast cleaning system as follows:
1 . Check that repair or other work is completed and that nobody is within or in the
immediate vicinity of the blast cleaning system.
2 . Check that all tools which were used have been removed from the blast cleaning system.
3 .
Properly reinstall all protective devices which were removed or opened.
4 .
Remove the safety tag and your personal padlock from the main switch of the electric
system.
5 . Turn the main switch of the electric system to "on".
6 . Remove the safety tag and the padlock from the shut-off tap of the pneumatic system.
7 .
Reconnect the pneumatic lines. Open the shut-off tap of the pneumatic system.
8 .
Remove the safety tag and the padlock from the shut-off tap of the hydraulic system.
9 .
Reconnect the hydraulic lines. Open the shut-off tap of the hydraulic system.
Now you can restart the blast cleaning system as described in the operating instructions.
IMPORTANT
If you see other workers' personal safety tags during the start-up procedure,
stop
the
procedure
immediately.
If necessary, re-establish lock-out/tag-out
7-20