Goff 2460, Operation And Maintenance Manual

Page: 88 / 105

PREPARE FOR EMERGENCIES
Be prepared if a fire starts.
Keep first aid kit and fire extinguisher handy.
Keep emergency number for doctors, ambulance service, hospital, and fire department near your
telephone.
WEAR PROTECTIVE CLOTHING
Always wear fairly tight clothing and proper safety equipment.
AVOID HIGH-PRESSURE FLUIDS
Escaping fluid under pressure can penetrate the skin causing serious injury. Put blast
machine into ZMS
®
to relieve pressure before disconnecting hydraulic or other lines. Tighten all
connections before applying pressure. Keep hands and body away from pinholes and
connections which eject fluids under high pressure. Use a piece of cardboard to search for leaks.
If ANY fluid is injected into the skin, see a doctor immediately.
SERVICE MACHINE SAFELY
Never operate the machine if an unsafe condition exists.
Be sure you understand the service procedure before working on the machine.
Put blast machine in Zero Mechanical State (ZMS
0
)
before doing maintenance. See
Putting Blast Machine in (ZMS
®
) in this manual.
DANGER!
WHEN USING TWO PEOPLE to make checks with
the machine running - the operator at the controls
must be able to see the person doing the checking.
DANGER!
DO NOT ever climb into machine when machine is not
in ZMS
®
.
CLEAN THE MACHINE AND FLOOR REGULARLY
Remove any grease, oil, shot, and sand or dirt build-up to avoid possible injury or
machine damage. Remove shot beads from floor daily, or more frequently, ifrequired.
7-10