®
PRO-HDBaseT2P
PRO-HDBaseT2P-RX
Front Panel
Rear Panel
1
5
4
3
2
6
7
1. LED:
Power LED, Link LED, Signal LED
(1) Power LED: Power indicator LED
(2) Link LED: Link indicator LED
(3) Signal LED: When receiving unit receive the HDMI signal, the LED light will shine
2. RJ45:
Plug in a Cat-5/5e/6 cable that needs to be linked to the transmitting unit
3. IR Receiver:
Infrared 3.5mm socket for plugging in the extension cable of IR
receiver
4. IR Blaster:
Infrared 3.5mm socket for plugging in the extension cable of IR blaster
5. RS-232(terminal block format):
The order of RS-232 pin are TX, RX, GND
(from left to right)
6. Dip Switch:
for F/W update ([ON] F/W update Mode; [OFF] Normal Mode)
7. HDMI OUT:
Connects to a HDMI display with HDMI male-male cable
9
