background image

®

PRO-HDBaseT2P

14

10. Limited Warranty

The SELLER warrants the 

PRO-HDBaseT2P

 

1x2 4K-HDR HDMI Splitter over Sing-

le Cat.x with HDBaseT-Lite, IR, RS-232, PoC & Loopout

 

free from defects in the 

material and workmanship for 1 year from the date of purchase from the SELLER 

or an authorized dealer. Should this product fail to be in good working order wi-

thin 1 year warranty period, The SELLER, at its option, repair or replace the unit, 

provided that the unit has not been subjected to accident, disaster, abuse or any 

unauthorized modifications including static discharge and power surge. This 

warranty is offered by the SELLER for its BUYER with direct transaction only. This 

warranty is void if the warranty seal on the metal housing is broken.
Unit that fails under conditions other than those covered will be repaired at the 

current price of parts and labor in effect at the time of repair. Such repairs are 

warranted for 90 days from the day of reshipment to the BUYER. If the unit is 

delivered by mail, customers agree to insure the unit or assume the risk of loss 

or damage in transit. Under no circumstances will a unit be accepted without a 

return authorization number.

The warranty is in lieu of all other warranties expressed or implied, including 

without limitations, any other implied warranty or fitness or merchantability for 

any particular purpose, all of which are expressly disclaimed.

Proof of sale may be required in order to claim warranty. Customers outside 

Taiwan are responsible for shipping charges to and from the SELLER. Cables and 

power adapters are limited to a 30 day warranty and must be free from any mar

-

kings, scratches, and neatly coiled.
The content of this manual has been carefully checked and is believed to be 

accurate. However, The SELLER assumes no responsibility for any inaccuracies 

that may be contained in this manual. The SELLER will NOT be liable for direct, 

indirect, incidental, special, or consequential damages resulting from any defect 

or omission in this manual, even if advised of the possibility of such damages.

 

Also, the technical information contained herein regarding the PRO-HDBa-

seT2P features and specifications is subject to change without further notice.

Summary of Contents for prophecy PRO-HDBaseT2P

















Reviews: