®
PRO-HDBaseT2P
6. Panel Description
Front Panel
Rear Panel
1. Power LED:
Power indicator
2. Micro-USB:
For technical support only [firmware update]
3. HDMI Signal LED:
Input, Loopout 1, Loopout 2 (from left to right)
4. Link Receiver LED:
Link LED indicator 1-2
5. HDMI Signal LED at Receiver:
Output signal LED indicator 1-2
6. +12V DC:
Connect to the +12V DC power supply unit
7. 2-PIN Dip Switch:
For firmware update
7
1
2
6
7
8
9
10
15
11
12
13
14
5
4
3
8. EDID Management Rotary control:
MODE 0
Ultra HD(4K2K@60) – 8/10/12bit 3D HDR video & 7.1ch audio
MODE 1
Ultra HD(4K2K@60) – 8/10/12bit 3D HDR video & 2ch audio
MODE 2
Ultra HD(4K2K@30)(4K2K@60 420) – 8/10/12bit 3D HDR video & 7.1ch audio
MODE 3
Ultra HD(4K2K@30)(4K2K@60 420) – 8/10/12bit 3D HDR video & 2ch audio
MODE 4
Full-HD(1080p@60) – 12bit 3D video & 7.1ch audio
MODE 5
Full HD(1080p@60) – 8bit 2D video & 2ch audio
MODE 6
Learning EDID from loopout #1
MODE 7
Auto EDID analysis learning mode
DIP Switch Position
Description
PIN#1
PIN#2
OFF[
]
OFF[
] Working Mode & Input F/W Update
OFF[
]
ON[
]
Reserved
ON[
]
OFF[
] Output 1 F/W Update
ON[
]
ON[
]
Output 2 F/W Update
ON[
] OFF[
]
PRO-HDBaseT2P
