gofanco HDExt24-HD20, User Manual

Page: 10 / 28

10
Source Device Switching
Manual Switching
Press the Select button to switch to the next source device,
the corressponding input LED will light up.
Auto Switching
Press and hold down the Select button for at least 3
seconds to enable auto-switching mode. The operating
parameters are shown below.
• The Splitter/Extender will switch to the first available
active input starting with HDMI In 1
• New Input: When a new source device is detected,
the Splitter/Extender will automatically switch to it
• Source Removed: When an active source is removed,
the Splitter/Extender will switch to the first available
active source
• Power Off: The Splitter/Extender saves the last
configuration before powering off. If the last
switching mode is auto switching, the splitter will
automatically enter auto switching mode when it is
restarted. Then if the last selected source input is
still available, the Splitter/Extender will switch to
it. Otherwise, it will switch to the first available
active source input.