gofanco HDExt24-HD20, User Manual

Page: 18 / 28

18
RS232 Commands
System Commands
Signal Switching Commands
The splitter and compatible receivers features RS232 ports
to transmit RS232 signals from computer to control far-end
third-party devices by using 3-pin to DB9 cable and a
RS232 control software, such as docklight. After installing
the RS232 control software, please set the parameters of
COM number, bound rate, data bit, stop bit and the parity
bit correctly. Compatible receivers must be able to
communicate at 9600, 19200, 38400, 57600, or 115200 baud.
The splitter requires the following communication protocol
parameters: Baud rate: 9600 (default) Data bit: 8 Stop
bit: 1 Parity bit: none
Note:
All commands need to be ended with “<CR><LF>”.
In the commands, “[”and “]” are not needed to be typed
in actual operation.
Type the command carefully, it is case-sensitive.