7
1.3
Functioning
How the machine works is shown schematically In figure 1-1.
No.
Description
1 Water connection
2 Inlet valve
3 Boiler (pressure less)
4 Outlet valve*
5 Boiler drainage clip
6 Product Containers*
7 Mixer systems*
*No.
of
Outlet
Valves,
Product
Containers
and
Mixers
may
change
depending on model
The drinks in the Minifresh are prepared in accordance with the instant principle: a specific
amount of hot water and soluble product/s (premix) are dosed in a whipper assembly. There,
they are mixed with a rapidly rotating blender. This mixture flows, along with any other soluble
products, out of the outlet into your cup.
The hot water comes from a boiler, where it is kept at a constant temperature. If the Minifresh
Vending Machine has a permanent water connection then the water level is replenished to the
maximum level after the drink has been dispensed.
Various motors and valves are built in for dosing the products and water quantities. Through
the use of modern electronics, the various electrical addressing times can be precisely
adjusted. In this way, the Minifresh Vending Machine can be adjusted to personal taste.
The right flavour and mixture can only be achieved with proper regulation of the water and
product dosage. Inexpert adjustment can quickly lead to blockages. Your dealer will ensure
the correct adjustments during installation. The settings can always be adjusted later by a
skilled operator if necessary.
Warning: The appliance is not to be used by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction. Please ensure children being supervised
not to play with the appliance.
Summary of Contents for Minifresh 2000
Page 27: ...27...
Page 28: ...28 Dealer s Contact Details...
