Godrej Minifresh 2000, User Manual

Page: 6 / 28

6
Objective
Minifresh Vending Machine is intended solely for preparing instant hot drinks, such as coffee, tea,
soup etc. The hot water key can be used to prepare other hot drinks, such as tea with tea bag etc.
It can also be used to prepare recipe.
It is not permitted to use the Minifresh for any other purposes than those described above. Neither
is it permitted to place Minifresh in areas that are cleaned using high pressure water or steam.
The machine installation and setting should be done only by an authorized service engineer.
Programming of the machine (Section 7) is applicable for such person only.
1.2
Safety
1.2.1
Original parts
Use only original parts and spare parts made available by Godrej & Boyce Mfg. Co. Ltd. The same
applies to the options mentioned. These meet stringent quality requirements so that Minifresh will
remain in good working order. If non-original parts are used, the guarantee will lapse and Godrej &
Boyce Mfg. Co. Ltd. will no longer be liable for any resulting damage.
1.2.2
Hygiene
To ensure proper hygiene and safety, it is essential to maintain Minifresh according to the
instructions.
1.2.3
Ventilation holes
Ensure that objects or liquids cannot enter Minifresh through the ventilation holes. Immediately
remove the plug from the socket if any fluids do get into the machine. Never spray with a water hose
or such like in the direction of the Vending machine. Do not pour water on the machine for cleaning.
1.2.4
Water temperature
There is a water boiler inside Minifresh with a water temperature of 80-97°C. The water also remains
hot for a long time after Minifresh has been switched off. Mishandling, tilting the machine without
draining water from the boiler may cause burns.
1.2.5
Dispensing time
The drink is dispensed almost immediately after selection.
1.2.6
Electrical safety
No parts should be removed that require tools to do so. This may only be done by an approved
service engineer.
No objects should be inserted into the Minifresh
’ various openings and no water should be sprayed
in or on the Minifresh. Minifresh Vending Machine must also not be placed in rooms that are cleaned
with steam or high-pressure equipment.
1.2.7
Stability
Make sure that the machine is standing on a perfectly level surface. Inclined surface installation may
cause hot water leakage from the machine and may become a potential electrical hazard due to
short-circuit inside the machine or burns to the users.
There are no user serviceable parts inside the machine. It requires
special tools and training to service and troubleshoot. Users need
not open the back cover of the machine under any circumstance.
Please contact authorized service centre in case of assistance.