4. BEFORE USING THE APPLIANCE
4.1Preparing your Dishwasher for first use
Check whether the electricity and supply
water specifications match the values
indicated in the installation instructions
for the machine.
Remove all packaging materials inside
the machine.
Set the water softener level.
Fill the rinse aid compartment.
4.2 Fill the salt (IF AVAILABLE)
To fill with softener salt, open the salt
compartment cap by turning it counter
clockwise.
(1) (2) At first use, fill the compartment
with 1 kg salt and water (3) until it is
almost overflowing. If available, using the
funnel (4) provided will make filling easier.
Replace the cap and close it.
After every 20th-30th wash, add salt into
your machine until it fills up
(approx. 1 kg).
Use softener salt specifically produced for
use in dishwashers.
When you start your dishwasher, the salt
compartment is filled with water, therefore
put the softener salt in prior to starting your
machine.
If the softener salt has overflowed and you do
not start the machine immediately, run a
short washing program to protect your
machine against corrosion.
4.3. Test Strip
NOTE:
The level is set to 3 as default. If the water is well water or has a hardness level above
90 dF, we recommend that you use filter and refinement devices.
Run water
through the
tap (1min.)
Keep the
strip in the
water (1sec)
Shake the
strip.
Wait
(1min.)
Set the hardness level of
your machine.
1
2
3
4
5
6
1
2
3
4
SAL
T
9
Summary of Contents for EON VESTA DWF EON VES 12U NF STSL
Page 25: ...Branch Branch Addresses Service Connect 12 BRANCH ADDRESSES SERVICE CONNECT 24...
Page 27: ...26...
Page 28: ...27...
