Godrej EON VESTA DWF EON VES 12U NF STSL, User Manual

Page: 16 / 29

7. THE CONTROL PANEL
15
Press the Power On/Off button ( 1 ), the
Start/Pause light ( 4 ) will illuminate.
Select the programme most suitable for
your dishes using the Programme Selection
button ( 2 ).
Additional functions can also be selected.
NOTE: Press the Half Load button ( 3 )
to reduce the duration of a programme, and
therefore decrease your energy and water
consumption.
NOTE: If an extra feature has been
used on the most recent wash programme,
this feature will remain active on the next
selected programme. If you do not want to
use this feature on the newly selected wash
programme, press the feature button until
the light on the button switches off.
Press the Start/Pause button ( 4 ) to start the
programme. The light on the Start/Pause
button will switch off and the Wash light ( 6 )
will illuminate.If the door of your machine
is opened while a programme is operating,
the Start/Pause light will flash.
The Wash, Dry and End lights on the
Control Panel indicate the status of the
programme in operation. The machine will
remain silent for 40 to 50 minutes while the
Drying light is on.
NOTE:
Simultaneously press the
Programme Selection ( 2 ) and Half Load ( 3 )
buttons for 3 seconds to activate/deactivate
the Child Lock. When it is first activated,
the Wash (
6
) light will flash once. When it
is deactivated, the Wash light ( 6 ) will flash
twice.
NOTE: When there is insufficient
softening salt, the Salt Lack Warning
After the programme stops, select
the desired program using the
Programme Selection button.
The new programme will
resume the course of
the old programme.
7.2. Cancelling a Programme
Follow the steps below to cancel a
programme while in operation.
Indicator ( 5 ) will illuminate to indicate the
salt chamber needs filling.
NOTE: When there is insufficient rinse
aid, the Rinse Aid Lack Warning Indicator
( 5 ) will illuminate to indicate the rinse aid
chamber needs filling.
7.1. Changing a Programme
Follow the steps below to change a
programme while in operation.
B�r-
B�r-
B�r-
Press the Start/Pause button
to start the newly selected
programme.
B�r-
Press the Start/Pause
button once.