background image

9.  TROUBLESHOOTING

FAULT

POSSIBLE CAUSE

TROUBLESHOOTING

The programme does 

not start.

Your Dishwasher is not plugged in.

Plug your Dishwasher in.

Your Dishwasher is not switched on.

Switch your Dishwasher on by pressing the 

On/Off button.

Fuse blown.

Check your indoor fuses.

Water inlet tap is closed.

Turn on the water inlet tap.

Your Dishwasher door is open.

Close the Dishwasher door.

Water inlet hose and machine filters 

are clogged.

Check the water inlet hose and machine 

filters and make sure they are not clogged.

Water remains inside 

the machine.

Water drain hose is clogged or 

twisted.

Check the drain hose, then either clean or 

untwist it.

The filters are clogged.

Clean the filters.

The programme is not finished yet.

Wait until the programme is finished.

Machine stops during 

washing.

Power failure.

Check mains power.

Water inlet failure.

Check water tap.

Shaking and hitting 

noises are heard during 

a wash operation.

The spray arm is hitting the dishes in 

the lower basket.

Move or remove items blocking the spray 

arm.

Partial food wastes 

remain on the dishes.

Dishes placed incorrectly, sprayed 

water not reaching affected dishes.

Do not overload baskets.

Dishes leaning each another.

Place dishes as instructed in the section on 

loading your dishwasher.

Not enough detergent used.

Use the correct amount of detergent, as 

instructed in the programme table.

Wrong wash programme selected.

Use the information in the programme table 

to select the most appropriate programme.

Spray arms clogged with food waste.

Clean the holes in the spray arms with thin 

objects.

Filters or water drain pump clogged 

or filter misplaced.

Check if the drain hose and filters are 

correctly fitted.

19

Summary of Contents for EON VESTA DWF EON VES 12U NF STSL






























Reviews: