Godox XProF, Instruction Manual, Page: 5 / 14

1.2 Long press the < Zm/CH > button to set
channel, group, mode and parameters (refers
to the contents of “Setting the Flash Trigger”).
1.3 Turn on the camera flash, press the
wireless setting button and the wireless
icon and <
SLAVE > slave unit icon will be
displayed on the LCD panel. Press the <CH>
button to set the same channel to the flash
trigger, and press the <Gr> button to set the
same group to the flash trigger
(Note: please refer to the relevant instruction manual
when setting the camera flashes of other models).
1.4 Press the camera shutter to trigger and the status lamp of the flash trigger
turns red synchronously.
2. As a Wireless Outdoor Flash Trigger
Take AD600B as an example:
2.1 Turn off the camera and mount the
transmitter on camera hotshoe. Then,
power on the flash trigger and the
camera.
2.2 Long press the < Zm/CH > button to set
channel, group, mode and parameters
(refers to the contents of “Setting the
Flash Trigger”).
2.3 Power on the outdoor flash and press the wireless setting button and
the wireless icon will be displayed on the LCD panel. Long press the
< GR/CH > button to set the same channel to the flash trigger, and short press
the < GR/CH > button to set the same group to the flash trigger.
Using the Flash Trigger
- 30 - - 29 -
< >
< >
< >
< >
3. As a Wireless Studio Flash Trigger
Take GS400II as an example:
3.1 Turn off the camera and mount the
transmitter on camera hotshoe. Then,
power on the flash trigger and the camera.
3.2 Long press the < Zm/CH > button to set
channel, group, mode and parameters
(refers to the contents of “Setting the Flash Trigger”).
3.3 Connect the studio flash to power source and
power it on. Synchronously press down the <G R/CH > button and
< S1/S2 >button and the wireless icon will be displayed on the LCD
panel. Long press the < GR/CH > button to set the same channel to the flash
trigger, and short press the < GR/CH > button to set the same group to the
flash trigger (Note: please refer to the relevant instruction manual when
setting the studio flashes of other models).
3.4 Press the camera shutter to trigger. And the status lamp of the camera flash
and the flash trigger both turn red synchronously.
Note: As the studio flash’s minimum output value is 1/32, the output value of the flash trigger
should be set to or over 1/32. As the studio flash do not have TTL and stroboscopic functions, the
flash trigger should be set to M mode in triggering.
CH
%
< >
Using the Flash Trigger
t0.1
AD 600B
M
A
1 /256
1/10000 CH19
M
A
CH19
1/
128
Zoom
24
mm
SLAVE
Zm/C.Fn Gr CH
±
M
( Note: please refer to the relevant instruction manual when setting the outdoor flashes of other
models)
.
2.4 Press the camera shutter to trigger and the status lamp of the flash trigger
turns red synchronously.