5.3
5.4
LOCK
5.2
CCT
SET
DIM
5.2 Detach battery case: Push the battery
case’ slide lock and push the battery case
upwards to take it out.
5.3 Connect the battery case with light
body: Insert one end of the power cord into
the battery box and the other end into the
DC socket of the lamp cap.
5.4 Insert two NP-F970 batteries and the
LED light can be put into usage.
SET
8.1 When the LED Light bead temperature is too high, the display screen will display
the high temperature alarm symbol .
8.2 When the LED Light temperature returns to normal, the lamp will automatically
release the alarm. At this time, the DIM dial can be rotated to change the brightness.
8.3 When the temperature sensor failure symbol appears on the display, it means
that the high temperature alarm function of the machine has failed.
Errl
6. Low Battery Indication
When the battery is below one grid, the low battery indicator will pop out.
7. Locking Function
In power-on state, long press the CCT/SET button for 2 seconds and the locking icon
will appear on the display. Long press the button for 2 seconds again to unlock.
Note: The locking function only works in panel function, the Bluetooth control
are not affected.
6500
49
%
K
8. High Temperature Alarm Function
