19
key works with CAS4 normally.
CAS4/CAS4 + Programming Test Platform Operation Steps:
①
Connect the CAS dedicated plug to the CAS4 immobilizer module.
②
Connect Godiag CAS4 / CAS4+ programming test platform to GT100+.
③
Connect the OBD2 female cable of GT100+ to VVDI2 or the device which can read the data of
CAS4.
④
Open the key programmer software, follow the instruction to obtain the data to complete key
programming.
⑤
If all keys lost, please keep pressing the start switch to forcibly start CAS4 so that the key
programmer can read the data of CAS4.
⑥
Put the programmed key into the key coil of Godiag CAS4 / CAS4+ programming test platform.
⑦
Press the start switch of Godiag CAS4 / CAS4+ programming test platform, if the dashboard
indicator turn on, it means that the key and the CAS4 module are synchronized, otherwise, they
are not synchronized.
⑧
Press the start switch again, and the dashboard indicator turn off.
⑨
Press the start switch again, wait for about 10s and GT100+ CAN protocol indicator turn off.
