3
Before starting to use the equipment, please refer to and observe the safety information provided by the
vehicle or equipment manufacturer and applicable testing programs. Please
use the equipment according to the Operation Manual, read, understand, and observe all safety
information and instructions included in this manual.
Please at least observe the following safety precautions working at the vehicle:
◆
Please work at a safe environment where it’s essential to keep the working area ventilated since
the vehicle exhaust is harmful to human bodies.
◆
Wear goggles that meet the ANSI standard
◆
Set the gear to P (auto) or N (manual) and guarantee the parking brake is enabled (hand brake
pulled)
◆
Make sure your clothes, hair, hands, and tools stay away from the operating engine parts or hot
engine parts
◆
Place bricks before each wheel to prevent the vehicle from moving accidentally
◆
The vehicle must be attended during testing and operating
◆
Pay special attention when working around the ignition coil, distributor cap, ignition wire, and
ignition plug for that these parts can generate dangerous voltages
◆
Make sure fire extinguishers suitable for the gas/chemicals/are electrical provided at the site
◆
Do not plug or unplug the equipment when the ignition switch is on or the engine is working
◆
Keep the equipment dry, clean, and avoid touching oil, water or grease. Use a clean cloth to clean
the equipment.
◆
Do not operate the diagnostic equipment during driving to avoid accidents owing to the
distraction.
◆
Please refer to the maintenance manual when maintaining the vehicle and operate strictly
according to the precautions, otherwise it may cause human injury or damages to the diagnostic
equipment.
◆
Do not place the diagnostic equipment onto the distributor of the vehicle for that strong EMI may
damage the equipment.
◆
When replacing the battery with GT100+, do not switch on the ignition switch or start the vehicle.
