Godex RT800i Series User Manual Download

Page: 55 / 101

5.2 Installing the Label Dispenser

The Overview of the Label Dispenser

Preparation Steps

Please see the Section 5.1 Preparation Steps to complete the preparation steps before installing the label
Dispenser.

Installing the Label Dispenser

1. Removed the front panel.
2. Press the catches on the left and right sides of the platen downwards and then pass the connection cable
through the slot of the printer.

Note

* A label liner thickness of 0.06 mm ± 10% and a weight of 65 g/m2 ± 6% are recommended.

* The label dispenser will take labels up to a max. width of 118 mm.

* When using the label dispenser, set the stop position (printer command ^E) to 13.

PAPER SENSOR

PAPER FEED ROLLER

CONNECTION CABLE OF
LABEL DISPENSER

COVER

SLOT

Summary of Contents for RT800i Series






































































































Search results

Summary of Contents for RT800i Series

Reviews:

Related manuals for RT800i Series

Brands by name

Popular brands

Godex RT800i Series, User Manual

Search results

Summary of Contents for RT800i Series

Reviews:

Related manuals for RT800i Series

Brands by name

Popular brands