Godex GS550 User Manual Download Page 129

Page: 129 / 140

A - 3

Symbology

AIM ID

Possible
AIM ID
Modifiers
(m)

Code ID
(hex)

TCIF Linked Code 39 (TLC39)

]L2

T (0x54)

Telepen

]Bm

t (0x54)

UPC-A

]E0

c (0x63)

UPC-A with Add-On

]E3

c (0x63)

UPC-A with Extended
Coupon Code

]E3

c (0x63)

UPC-E

]E0

E (0x45)

UPC-E with Add-On

]E3

E (0x45)

UPC-E1

]X0

E (0x45)

Note:

“m” represents the AIM modifier character. Refer to International
Technical Specification, Symbology Identifiers, for AIM modifier character
details.

Prefix / Suffix entries for specific symbologies override the universal (All
Symbologies, 99) entry.

Refer to Data Editing beginning on page 4-1 and Data Formatting beginning on
page 5-1 for information about using Code ID and AIM ID.

Summary of Contents for GS550













































































































































Search results

Summary of Contents for GS550

Reviews:

Related manuals for GS550

Brands by name

Popular brands

Godex GS550, User Manual

Search results

Summary of Contents for GS550

Reviews:

Related manuals for GS550

Brands by name

Popular brands