manualshive.com logo in svg

Godex EZPi-1200, User Manual

Share
Download
Godex EZPi-1200 User Manual Download Page 7

 

Code Pages 

CODEPAGE 437, 850, 851, 852, 855, 857, 860, 861, 862, 863, 865, 866, 869, 
737 
WINDOWS 1250, 1251, 1252, 1253, 1254, 1255 
Unicode (UTF8, UTF16) 

Graphics 

Resident graphic file types are BMP and PCX, other graphic formats are 
downloadable from the software 

Interfaces 

Serial port: RS-232 (DB-9)   
USB port (default on) 
Parallel port: Centronics 36-pin 
PS2 port 
CF Card socket 
Ethernet 10/100Mbps print server (default off; disables USB when in use) 

Control Panel 

Backlit graphics LCD display: 128 x 64 dots or 4 lines x 16 characters 
Three mono-color status-LEDs: Power on, Ribbon out, Media out 
Control keys: FEED, PAUSE and CANCEL 

Real Time Clock 

Standard 

Power 

Auto Switching 100-240VAC, 50-60Hz 

Environment 

Operation temperature: 41°F to 104°F (5°C to 40°C) 
Storage temperature: -4°F to 122°F (-20°C to 50°C) 

Humidity 

Operation: 30-85%, non-condensing.   
Storage: 10-90%, non-condensing. 

Agency 

Approvals 

CE(EMC), FCC Class A, CB, cUL, CCC 

Dimension 

Length: 11.2” (285 mm) 
Height: 6.8” (171 mm) 
Width: 8.9” (226 mm) 

Weight 

6.6 lbs (3.0Kg) ,excluding consumables 

Options 

Rotary Cutter 
Label Stripper 
External label roll holder for 10” (250 mm) O.D. label rolls 
External label rewinder 
802.11 b/g wireless print server (Default off; disables USB when in use. Must 
remove PS2 port and Ethernet card to install) 

Specifications are subject to change without notice. All company and/or product names are   
trademarks and/or registered trademarks of their respective owners. 

 

EZPi-1000 User’s Manual 
 

6

Summary of Contents for EZPi-1200














































Reviews:

No comments

Brands by name

Popular brands

Load more brands