42
Audio Features
& Connections
The Audio In and Audio Out connections can be used to connect audio equipment
to your Dual-Deck VCR.
Simulcast
This feature allows you to record stereo sound from your stereo amplifier while
recording picture from certain TV broadcasts, such as special concerts, MTV Music
Television, HBO, CINEMAX, etc.
❶
Connect your stereo amplifier tape output connections to the Audio In
connections on your Dual-Deck VCR back panel, Line 2.
➁
Turn on your TV, stereo amplifier, and your Dual-Deck VCR.
③
Set the Audio Source to Simulcast (SC2). See page 31.
④
Select the desired TV channel on the Dual-Deck VCR. Tune the stereo
receiver to the proper frequency to receive the audio transmission.
⑤
To record Simulcast, insert a blank tape into either deck, turn on
Hi-Fi for the appropriate deck (page 31), if desired, and press
Record.
Multichannel TV Sound (MTS) Stereo
You can enjoy MTS broadcast stereo by connecting your Dual-Deck VCR to your
stereo amplifier and speakers. MTS will allow you to enjoy full stereo sound when
your Audio Source is set to Stereo.
❶
Connect the Audio Out connections on your Dual-Deck VCR back
panel to the play or auxiliary input connections on your stereo
amplifier.
➁
Turn on your TV, stereo amplifier, and your Dual-Deck VCR.
③
Set the Audio Source to Stereo. See page 31.
④
Select the appropriate input (AUX or TAPE) on your stereo amplifier.
DUAL-DECK VCR BACK PANEL
IN
OUT
VIDEO
R L
AUDIO
OUT TO TV
IN FROM ANT
MONITOR
OUT
CH4
CH3
THIS DEVICE COMPLIES WITH FCC RULES PART 15.
OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE
HARMFUL INTERFERENCE AND, (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE THAT MAY BE
RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
C A U T I O N
R i s k o f E l e c t r i c a l S h o c k
D O N O T O P E N
AV I S
R i s q u e d e C h o c E l e c t r i q u e
N E PA S O U V R I R
TO STEREO AMPLIFIER
RECORD OUTPUT
TO STEREO AMPLIFIER
PLAY OR AUX INPUT
