9 - VCR
PLUS
+
RECORDING
61
9 - VCR Plus+ Recording
The VCR Plus+ Programming
System
®
(VCR Plus+) greatly
simplifies Timer Recording. To
tape a show, just look up its
PlusCode programming
number in your newspaper or
magazine listings, then enter it
into the VCR Plus+ menu.
To get started, you must first
match your local TV channels
to the VCR Plus+ preassigned
channels. This process is
known as “Channel Mapping.”
1
2
3
Open “Setup Menu”
Press Menu on the remote control, then
press 4 to open the “Setup Menu.”
Select “Advanced Features”
Press 5.
Select “VCR Plus Setup”
Press 3.
4
VCR Plus+ and PlusCode are
registered trademarks of Gemstar
Development Corporation. The VCR
Plus+ system is manufactured under
license from Gemstar Development
Corporation.
VCR Plus+ Channel Mapping
5
Select “VCR Plus Channel Setup”
Press the right arrow key.
Map Your Channels
Using the worksheet on the following page,
determine the local equivalents of the VCR Plus+
channels for your viewing area. You can find this
information in your local television listings or by
contacting your local cable company. Use the Left/
Right arrow keys to move between channels and
the Up/Down arrow keys to select channels. When
finished, press Menu to save and exit.
Summary of Contents for DDV9558
