Go-Video DDV9558, User Manual

Page: 63 / 120

7 - RECORDING FEATURES
53
Date/Time Stamp
The Date/Time Stamp allows
you to overlay the date, time,
and record source at the start
of, or continuously throughout,
your recordings. You can use
the stamp on all recordings or
on timer recordings only. The
stamp will not appear when
you copy a tape.
1
2
Open “Setup Menu”
Press Menu on the remote control, then
press 4 to open the “Setup Menu.”
Select “Copy/Record Settings”
Press 2.
Set “Date/Time Stamp”
Press 3 repeatedly to set Date/Time Stamp to:
•
Timer — The date, time, and record
source will appear briefly at the start of all
timer recordings only (default setting).
• All — The date, time, and record source
will appear briefly at the start of all
recordings except copies.
• Cont (Continuous) — The date, time, and
record source will appear continuously
over all recordings. The On-Screen
Display and Menu system will be dis-
abled if this setting is on. Press Stop on
the recording deck to restore normal on-
screen functions.
• Off — The Date/Time Stamp is disabled.
3
Sample Date/Time Stamp