Go-Video DDV9558, User Manual, Page: 39 / 120

4 - TUNER AND CHANNEL LIST
29
Broadcast television comes
into your home from one of
two sources: over the air via
antenna, or through a cable via
a local CATV (Community
Antenna Television) provider
or Satellite. The Tuner Band
setting allows you to specify
which source you are using.
Use this setting only if Auto
Setup detected the incorrect
band, i.e. channels are coming
in on the wrong channel
numbers.
1
2
3
Open “Setup Menu”
Press Menu on the remote control, then
press 4 to open the “Setup Menu.”
Select “Tuner & Channel List”
Press 3.
Set “Tuner Band “
Press the right arrow to select from the
following options:
•
Auto — Automatically detects the Tuner
Band.
• Antenna — Specifies that you are using
an indoor or outdoor VHF/UHF antenna.
• Cable — Specifies that you are using
either Community Antenna Television
(CATV, or cable) or a Satellite receiver.
Tuner Band
4 - Tuner & Channel List