I S A – A M S O p e r a t i o n
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 24 / 76
www.go-sys.de
9 Operation with AMS
9.1 The AMS Start Window
Start the program AMS
1
, e.g. via the program BlueBox SQL like here.
The AMS start window opens:
Example:
Configuration with only one connected spectrometer and the application-specific parameter
SAK254 (set up by default).
If several spectrometers are connected, they are displayed accordingly.
The greyed-out icons with the designation n/c are placeholders for application-specific parameters.
Icons:
Icon of the virtual sensors
Icon of the two internal current outputs, the two internal
relay outputs and the two internal pulse inputs.
Icon of a spectrometer
Icon of the serial interface
2
Icon of the messages (SMS and e-mail)
1
For a detailed description of the AMS software, see
Manual BlueBox PC Software
there
5 AMS - Advanced Managing Software
.
2
BlueBox T4: CAN1–6 | BlueBox TS: CAN1
3.
Double-click on Intensity opens the sensor setup window of the spectrometer.
Double-click on SAK254 opens the sensor setup windows of this application-specific parameter.
1.
Selection of the BlueBox
2.
Password input. The password can be found in the
configuration data sheet BlueBox under "2. Network".
Press the RETURN key.
•
(green circle) The password is valid.
•
(grey circle) The password is invalid.
Software version BlueBox SQL: 4.2.0.0
Software version AMS: 4.2.0.0
