7
REV.01
INSTALLATION INSTRUCTIONS
© 2016 Go Rhino Products. All rights reserved
Illustratión 1.
Driver inner.
Driver outer.
STEP #4
From the front of the BR20.5 bumper, push the sensor bezels into their precut holes in
the sensor bezel brackets. Make sure to install the bezels in the same position and order as the
OEM bumper.
STEP #5
Transfer the OEM bumper wiring harness with the attached sensors to the BR20.5
bumper. Install the parking sensors into each bezel, making sure to install the sensors in the same
order as they were removed from the OEM bumper.
STEP #6
With assistance attach the receiver hitch and each frame bracket to the frame using (3)
½” x 1 1/2” hex bolts, (6) ½” flat washers, (6) ½” lock washers, (Photo 1 & 2). Leave the hex bolts
loose for final adjustment.
Photo 1. Driver side.
Photo 2. Driver side.
