Original Instruction Manual
En
8
10/2016
maintained, the vibration emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the
times when the tool is switched off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration
such as: maintain the tool and the accessories, keep the hands warm, organization of
work patterns.
LIST OF MAIN PART
1. On/Off switch
2. Switch-lock
3. Spindle-lock button
4. Mounting point for auxiliary handle
5. Flange
6. Grinding disc guard
7. Auxiliary handle
8. Spanner
9. Allen key
OPERATION
Before use
Before making assembly, changing and adjustment for any accessory, disconnect the
tool from the mains supply to avoid any unintentional starting.
Please always check the mains supply voltage before use! It must correspond with the
rating label on the appliance.
Remove any packing material and loose parts from unit.
Check the accessories before use. It should be fit with the machine and your purpose.
Make sure that the workpiece is always firmly held and remains stationary
through if needed a fastening system during the entire use of the machine.
Disc guard
CAUTION! The machine should be used only with guard.
The position of the disc guard can be adjusted to suit the working conditions.
To do this, please follow below steps:
1. Loosen the hexagon bolt with the spanner.
